6-Stripe Blank Poker Chips – 11.5g, Insert Ready

11.5g 6-stripe blank poker chips with a precision-molded recessed center for laminated inserts. The classic six-stripe edge frames the artwork while the insert drops in flush with the rim — no raised edges, no edge lift.

10 products

Insert-Ready 6-Stripe Blanks for Flush Inlay Builds

The defining feature of this style is the recessed center well, molded just below the chip's outer rim. When a laminated insert or vinyl decal is applied, it seats into the cavity instead of sitting on top of the face, which removes the raised lip that catches on fingernails, pockets, and chip stacks. The finished chip has a smooth, factory-molded feel and far better resistance to peeling.

At 11.5 grams with a weighted composite core, these chips carry the heft players expect from a casino-style blank without adding excess load to press fixtures or print trays. The six-stripe edge pattern is a timeless casino look that pairs with almost any artwork, from corporate logos to event branding.

Ten colorways are stocked in volume, and the molding runs to tight tolerances so every chip in a batch takes inserts the same way. That consistency matters for insert workflows, where even small variance in recess depth means hand-fitting — these blanks are made to keep production moving.

Wholesale pricing is tiered by quantity, so per-chip cost drops as order volume climbs — a practical fit for shops quoting repeat client work. Chips are stocked in depth at the Roswell warehouse, which keeps lead times short and reorders predictable.

Specifications

  • Style: 6-Stripe (#331)
  • Weight: 11.5 grams
  • Size: 39mm (~1.54in) diameter × 3.5mm (~0.14in) thick
  • Imprint area: 31.65mm (1.246in)
  • Material: ABS composite with internal metal insert
  • Center: Recessed, engineered for laminated inserts
  • Print method: Laminated inserts and vinyl decals
  • Fulfillment: Ships from Roswell, Georgia

Frequently asked questions

What makes the 6-Stripe blank different from other styles?

The 6-Stripe is engineered specifically for laminated insert builds. Its recessed center lets printed decals sit flush with the chip face, which eliminates raised edges, reduces edge lift, and gives the finished chip a clean, professional feel.

Can I print directly on the 6-Stripe with a UV flatbed?

The 6-Stripe is optimized for physical inserts rather than direct printing. If you need direct UV capability, look at the 8-Stripe or 12-Stripe styles, which pair a recessed center with a UV-ready surface.

What size should my inserts be?

Cut inserts to fit the 31.65 mm (1.246 in) recess. Testing your exact die-cut diameter on a sample pack first is the reliable way to confirm a flush fit before a volume run.

What are the minimums and how fast is shipping?

Minimum order is 100 chips with 100-piece increments, and volume pricing applies on case quantities. Orders ship quickly from Roswell, Georgia.